PIAA Wiring

Discussion in 'Subaru Impreza WRX Help & advice' started by Chris__p, Apr 15, 2019.

  1. Chris__p

    Chris__p V-Limited Member

    Location:
    Hampshire
    Hi, so I obtained a set of the piaa lights that you could get which were specifically for the classic impreza.
    There is a relay box, what looks like an earth coming off the relay box, a long protected wire which I assume is the positive, two connections to the spot lights, what looks like another earth and then what looks like it was a signal wire. Will get a picture.
    I connected them up to a booster pack to test my thoughts but nothing.
    Does anyone have the wiring setup for these?
    I have read that there was also an option which disabled them unless the front dog light switch was on
     
  2. cuili1

    cuili1 V-Limited Member

    Location:
    Dunoon
    1 wire: +12v from the battery, normally with a fuse.
    1 wire: +12v Switched wire, normally spliced in to the +12v mainbeam wire.
    1 wire: Too the lights.
    1 wire: Earthed.

    Driving_light_relay_wiring_diagram.png
     

Share This Page