Gc8 (Possibly Sparco) 6 point bolt in roll cage


V-Limited Member
Alright guys,

Having a bit of a clearout of bits in the garage and decided to let my roll cage setup go.

It was removed from my low mileage V4 STI RA that was a circuit car in Japan and later a Hillclimb/Sprint car in the UK.

The cage was fitted in Japan so I have limited knowledge but been told its possibly a JDM Sparco cage due to the design or possibly Cusco.

It's 6 point, with the nice gussets on the B pillar (so looks like the prodrive cages through the window) door bars etc (but these are removable.)

Additionally to this I have the modified bar for behind the dash as well as the modified dash to go with it. This is the V4 to 6 dash and pre cut for the cage.

It all fits super nice and with a rub down and paint in colour of your choice, would look smart in any track inspired or trackday car.

All parts are numbered so re building shouldn't be too taxing :)

I'm down in Reading, so collection preferred but I can deliver locally or often travel up north for car bits and bobs so might be able to work something.

Pics are not the best but give you an idea, looking for £450 complete for cage, dash and dash bar.


V-Limited Member

Having the dash and bar means you can always revert to standard if you keep your removed dash etc....


  • 20221229_153819.jpg
    703.6 KB · Views: 17
  • 20221229_153830.jpg
    651.9 KB · Views: 16
  • 20221229_153836.jpg
    829 KB · Views: 16
  • 20221229_153845.jpg
    796.9 KB · Views: 15
  • 20221229_153916.jpg
    574.1 KB · Views: 15
  • 20221229_153919.jpg
    595.4 KB · Views: 15
  • 20221229_153924.jpg
    863.2 KB · Views: 15
  • 20221229_153935.jpg
    698.2 KB · Views: 14
  • 20221229_153945.jpg
    673.2 KB · Views: 18

Michael J

V-Limited Member
Interested in the dash and bar if you're willing to split and the price is right. Guessing you'd like to sell as a whole, but keep me in mind if the cage goes or you're happy to split.