Does anyone know how to remove the upper steering wheel cowl?
I’ve removed the bottom cowl, dropped the steering to the lowest position, removed the clock binnacle surround, removed the steering wheel & indicator/wiper stalks. And no luck.
It’s the two long prongs that the bottom cowl screws...
I came across this site today: Subaru Impreza fuse box diagrams for all years - StartMyCar
Can't guarantee the full accuracy a I've only been able to check our MY00 car.
There is some other data, accessible via the menu, but it looks very limited.
LINKS NO LONGER WORK
I accidentally came across this resource a few days ago.
It has links to Subaru Manuals
Also Video Tutorials, some Part Numbers and a link to an Amazon.com Shop.
I made up a tool based on one available from the USA to remove the clips at the front of the cowl panel - in my experience it is more effective than using angled long nose pliers.
https://www.type-ra.com/subaru-forum/threads/my00-jdm-gf8-wrx-sti-version-6-limited.37934/post-311949
Water that gets into and then runs down the inside of a GF8's hatch/tailgate rubber seal can get into the spare wheel well and can also corrode the seam onto which the rubber seal is fitted - particularly in my experience in the centre adjacent to the latch.
Here is my method of encouraging...
My preferred method is posted here (it's worth looking up the thread for background information):
https://www.type-ra.com/subaru-forum/threads/how-do-i-remove-a-rear-door-card-on-a-gc-f8-post-facelift-without-breaking-anything.38347/post-313091
I discovered this fantastic guide to replacing switch bulbs (you have to join LADS as a free member to see the post but it is worth it):
https://www.ladsoc.co.uk/forum/threads/switch-illumination.7212/#post-83204
See my photo story of replacing the rear screen heater switch backlight bulb on...
Hey guys,
I have just had all the visible aluminium brackets and tanks etc vapour blasted in my engine bay e.g header tank, PS pump reservoir and mounting bracket, ac mounting brackets etc.
They look really good however I am wanting to know, what is the best way to protect these, to stop them...
Hi everyone. I did a search but didn't find anything. I'm looking to take the door cards out of the car tomorrow in preparation for paint. Also, I need to remove the outside window trim. I'm not sure how to get either off. I found a screw on the back end of the rear window trim, removed it and...
The paint is flaking off my inlet (as they all do, I know). I would like to restore it to look original. I've seen plenty paint jobs and powder coated manifolds, but it never looks right, especially the colour.
Anybody know if it can be done?
I have noticed a couple of threads on this site lately that are asking for advice on what tube goes where and what electrical connector goes where after the removal of the inlet manifold,
"now it is time to put it back I have no idea what goes where":confused:
If you follow the simple steps...
Hi,
Thought I would detail a simple mod I did today involving replacing the stock intercooler intake plate with a larger Zero/Sport Intercooler Intake.
I purchased the intake from Jap Performance Parts but I think there are few places that sell them (some on eBay). These make a big...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.