Help find a part

Discussion in 'Subaru Impreza WRX Help & advice' started by Chris.air, May 12, 2018.

  1. Chris.air

    Chris.air V-Limited Member

    Location:
    Hamilton
    I bought this pump for my classic and the fittings are different
    On my set up the 3 pipes face down the issue I have is one of the pipes is facing left has a clip on it.
    I need to find the pipe that attaches to it then onto my rail.

    Hope I’ve explained it right.

    I’m thinking it’s from a later classic.

    Thanks 37436FA3-0E3C-4EB6-A5B1-98915C05BFFA.png
     
  2. asperformance

    asperformance Site Supporter

    Location:
    oop north
    you must have an earlier car as that housing is from approx 99/00

    the clip will simply remove and this is the feed line
     
    • Like Like x 1
    • Helpful Helpful x 1
  3. Chris.air

    Chris.air V-Limited Member

    Location:
    Hamilton
    Yes but its getting a fuel line to bend round and it’s kinda tight for a 90 elbo. Do they come on all later classics? I’m sure a breaker will have a load of them not something you would need.
    What would you call the part?

    Fuel pump housing feed pipe?
     
  4. 1509joe

    1509joe Type RA Member

    You need v1/3 version 4 onwards are like that I might have an original plastic 90 degree will have to go and look.
     
    • Helpful Helpful x 2
  5. Chris.air

    Chris.air V-Limited Member

    Location:
    Hamilton
    Any joy dude
     
  6. Chris.air

    Chris.air V-Limited Member

    Location:
    Hamilton
    @asperformance Alyn do you have or could you get?
     
  7. Keith

    Keith V-Limited Member

    Location:
    East Yorkshire
  8. Chris.air

    Chris.air V-Limited Member

    Location:
    Hamilton
    I think Duncan was going to do that but it’s was just a little to tight so I’m trying to get it oem for ease.
    Thanks tho I’ll keep my eyes peeled on flee bay tho I’m hoping I can just buy new.

    Cheers
     
  9. Keith

    Keith V-Limited Member

    Location:
    East Yorkshire
    If speed is more important @Chris.air then you could just buy a used tank with the pipes still there. Newage have the same profile/length of tank pipes. Just bear in mind an oem one will have those collars at both ends and I can't remember if the earlier cars have that plastic retaining clip at the other end or whether it's just secured with a jubilee clip.
     
  10. Chris.air

    Chris.air V-Limited Member

    Location:
    Hamilton
    If I can’t track one down tomorrow I’ll ask Duncan what route he wants to go down the joys of Fitting fancy parts I suppose o_O
     

Share This Page